Product Introduction Of Ball Milling:
The ball mill grinder we produce is a key equipment used for grinding crushed materials. ball mill machine consists of a hollow cylindrical shell, which is partially filled with balls. The grinding media of ball milling is steel balls, which can be used to reduce the size of materials into fine powder. The grinding of ball milling can be wet or dry, and ball mill grinder is suitable for a variety of ores and other materials. ball mill machine is widely used in powder production lines such as cement, silicate, new building materials, refractory materials, fertilizers, non-ferrous metal beneficiation, glass and ceramics.
Ball Mill Machine Parts:
Size (Φ x L) | RPM (r/min) | Material Feed Size (mm) | Capacity (T/hr) | Ball Load (T) | Motor Power (kW) |
| Φ2.6x10 | 20.8 | ≤25 | 21-24 | 64 | 800 |
| Φ2.6x13 | 20.8 | ≤25 | 28-31 | 81 | 1000 |
| Φ3x9 | 19.13 | ≤25 | 40-45 | 85 | 1000 |
| Φ3x11 | 18.92 | ≤25 | 44-47 | 95 | 1250 |
| Φ3x12 | 18.92 | ≤25 | 48-52 | 103 | 1250 |
| Φ3x13 | 18.92 | ≤25 | 48-52 | 116 | 1400 |
| Φ3.2x11 | 18.3 | ≤25 | 45-48 | 112 | 1400 |
| Φ3.2x13 | 18.7 | ≤25 | 50-55 | 133 | 1600 |
| Φ3.4x11 | 18 | ≤25 | 45-55 | 120 | 1600 |
| Φ3.5x13 | 17 | ≤25 | 60-65 | 156 | 2000 |
| Φ3.8x13 | 17 | ≤25 | 60-70 | 190 | 2500 |
| Φ3.8x13 | 17 | ≤25 | 60-70 | 185 | 2500 |
| Φ4x13 | 16.3 | ≤25 | 70-80 | 191 | 2800 |
| Φ4.2x11 | 15.8 | ≤25 | 100-110 | 190 | 2800 |
| Φ4.2x13 | 15.8 | ≤25 | 120-130 | 240 | 3350 |
| Φ4.2x13 | 15.8 | ≤2 | 180-200 | 240 | 3350 |
| Φ4.8x14 | 15 | ≤25 | 100-115 | 285 | 4200 |
Introduction To The Various Parts Of The Ball Mill:
Feeding Device:
The material is fed into the Ball Milling by the feeding device. The feeding device of the Ball Milling adopts an inclined shutter structure, which makes the feeding smoother. The Ball Milling feeding device is equipped with a replaceable liner, and a sealing device is provided at the connection with the rotating cylinder to prevent cold air from entering. A gasket can be added between the air inlet pipe and the frame to adjust the height of the Ball Milling feeding device as needed.
Slider bearings:
Slider bearings can automatically adjust their position when the ball mill grinder rotates, driving the rotation of the slider and the axial movement of the rotating cylinder
Components of Ball Mill Grinder:
Rotating drum
The rotating drum is a key component of the ball mill grinder, which consists of a hollow shaft, a shell, a lifting rod, a partition plate, a liner plate, etc. The grate plate of the ball mill grinder is made of wear-resistant cast steel to prevent the inner surface of the ball mill grinder from being worn. At the same time, a ball return device is provided on the grate plate of the ball mill grinder to increase the ventilation area.
Discharge device
The air outlet is located at the top of the Ball Milling discharge device, the Ball Milling discharge port is located at the bottom of the discharge device, and the discharge device is equipped with an inspection door for easy inspection and maintenance.
Gear
Ball Milling adopts a two-stage planetary reduction box, changing the fixed shaft to a movable shaft. The transmission efficiency of Ball Milling is increased to 96%, which is 7.3% higher than that of ordinary ball mills. The energy utilization efficiency of Ball Milling is outstanding.
Ball Mill machine product advantages:
The Ball Mill machine we produce can achieve greater output due to the larger size of the feed and discharge ports.
The Ball Mill machine adopts a two-stage planetary reduction box, changing the fixed shaft to a movable shaft, and the transmission efficiency of the Ball Mill machine is increased to 96%, which saves 7.3% energy compared to ordinary ball mills, and the energy saving effect is outstanding.
The Ball Mill machine has two forms: combined feeder and roller feeder, with a simple structure and can be installed separately.
The Ball Mill machine has no impact force and is suitable for long-term stable operation, so the Ball Mill machine has high efficiency and less maintenance time.
About Us:
Liyang Sinoma was established in Jiangsu in 2007 and has a large-scale mechanical equipment manufacturing base such as ball mill machine with an annual processing capacity of 300,000 tons. We can provide customized product services according to customers' specific needs for ball mill machine to meet customers' unique needs. We have reached cooperation with many customers at home and abroad. Our product ball mill machine has special pre-sales and after-sales services. You can fully trust our company's ball mill machine and other products. Liyang Zhongcai is not only the service provider you choose, but also your trusted partner.
