Apron feeder conveyor is a common industrial equipment used to transport materials from one location to another. However, just like other mechanical equipment, apron feeder conveyor may also encounter some failures. In this article, we will explore some common apron weigh feeder failures and solutions to help you better understand and maintain this equipment.
Material accumulation:
Material accumulation is one of the common faults of apron feeder mining. When the material accumulates too much on the feeder, it will cause the normal material conveying to be blocked. This may be caused by the mismatch of the conveying speed of apron weigh feeder or the poor fluidity of the material.
Solution:
1. Check whether the conveying speed of apron weigh feeder matches the fluidity of the material. According to the characteristics of the material, adjust the conveying speed of apron feeder mining to ensure that the material can pass through the feeder smoothly.
2. If the material fluidity is poor, you can consider using a vibrator or stirring device to improve the fluidity of the material to reduce accumulation.
Blockage:
Blockage is another common apron weigh feeder failure. When the material is blocked or accumulated at a certain position during the conveying process of apron feeder conveyor, it will cause the feeder to not work properly.
Solution:
1. Clean the conveying channel of apron feeder mining regularly to ensure that the channel is unobstructed. You can use gas jets, scrapers and other methods to remove blocked materials.
2. Check whether the conveying speed of apron feeder conveyor is appropriate. If the conveying speed of apron weigh feeder is too fast, it may cause material blockage. According to the nature of the material and the specifications of the feeder, adjust the conveying speed to avoid blockage.
Electrical failure:
Apron weigh feeder's electrical system may fail, such as motor failure, wire breakage and other problems. These failures will cause apron feeder mining to not work properly.
Solution:
1. Check the connection of the electrical system regularly to ensure that the wires are not damaged or broken. If a wire fault is found, replace or repair it in time.
2. Check the working condition of the motor. If the motor cannot start or rotate normally, it may be a fault of the motor itself. In this case, you need to contact a professional for repair or replacement of the motor.
The above are common apron feeder mining faults and solutions. Through regular inspection and maintenance, these faults can be effectively prevented and solved to ensure the normal operation of the feeder. We are a company that specializes in manufacturing apron feeder conveyor and other equipment. If the fault is beyond our repair scope or cannot be solved, please contact us in time. I hope this article will help you understand and maintain apron feeder conveyor.